Filter
Top Products
En 29
En
2
Press ( ) to set flash mode.
• The current flash setting is displayed.
• Each time you press , the flash mode changes in the following
sequence:
“AUTO” – “ Red-eye reduction” – “ Fill-in flash” – “ Flash off”.
3
Press the shutter button halfway.
• When the flash is ready to fire, the orange lamp lights steady.
4
Press the shutter button fully to take the picture.
Auto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
Red-eye reduction flash ( )
The red-eye reduction flash mode reduces this phenomenon by emitting pre-
flashes before firing the regular flash.
Fill-in flash ( )
The flash always fires every time the shutter button is released.
Flash off ( )
The flash does not fire even in low light conditions.
J USING THE SELF-TIMER/REMOTE
CONTROL
Self-timer : This function is useful for taking pictures with yourself
included in the photograph.
Remote control : Shooting is possible using the remote control device (sold
separately in some regions). This is useful when you want
to take a picture with yourself in it or a night scene, without
touching the camera.
1
Mount the camera on a tripod or place it on a stable, flat
surface.
2
Open the lens barrier fully.
• The lens extends and the monitor turns on.
3
Press ( ) to set the self-timer mode ( ) or remote
control mode ( ).
• The setting changes between / OFF, and each time
is pressed.
basic_e_opx_6.fm Page 29 Thursday, December 12, 2002 10:44 AM