Filter
Top Products
36 En
En
1
In the top menu, select MODE MENU CARD CARD
SETUP, and press .
• Shooting mode
The FORMAT screen is displayed.
• Playback mode
The CARD SETUP screen is displayed.
2
If the FORMAT screen is displayed, press to
select YES.
If the CARD SETUP screen is displayed, press to
select FORMAT, then press . When the
FORMAT screen appears, press to select YES.
3
Press .
• The BUSY bar is displayed and the card is formatted.
J PLAYBACK ON A TV
Use the Video cable provided with the camera to play back recorded images
on your TV.
1
Make sure that the camera and the TV are turned off.
Connect the Video cable to the VIDEO OUT jack on the
camera and the video input terminal on the TV.
2
Turn the TV on and switch to the video input mode.
3
Press .
• You are recommended to use the optional AC adapter when using
the camera with a TV.
• Make sure that the camera’s video output signal type is the same as
the TV’s video signal type.
Note
basic_e_opx_6.fm Page 36 Thursday, December 12, 2002 10:44 AM