Filter
Top Products
38
EN
Adjusting the flash intensity [
w
]
K CAMERA MENU X w
: P A S M
r
s
In certain situations, it is advisable to adjust the fl ash intensity, such as when shooting small subjects
or distant backgrounds. This function is also used when increased contrast is desired.
Submenu 2 Application
−2.0 to +2.0 Adjust the fl ash intensity for the shooting scene.
Using an external flash [
Q
FLASH]
K
CAMERA MENU
X
Q
FLASH
: P A S M
r
s
Submenu 2 Submenu 3 Application
IN — The built-in fl ash is used for taking pictures.
#RC
CH1 to CH4
An Olympus Wireless RC Flash System compatible fl ash is
used for taking pictures. The channel (CH1 to CH4) can be
selected.
SLAVE 1 to 10
The commercially-available slave fl ash that is synchronized
with the camera fl ash is used for taking pictures. The fl ash
intensity setting can be adjusted.
“Taking pictures with the Olympus Wireless RC Flash System” (p. 80)
When set to [SLAVE], the fl ash setting automatically changes to [# FILL IN] (p. 23).
When set to [SLAVE], the fl ash can fi re when [DRIVE] (p. 34) is set to a setting other than [o], but if
the fl ash intensity is large, the interval between sequential shots becomes longer.
book_d4374_en.indb 38book_d4374_en.indb 38 18/07/2008 13:39:1818/07/2008 13:39:18