Filter
Top Products
56
EN
Setting the startup display screen and sound [PW ON SETUP]
x SETUP X PW ON SETUP
Submenu 2 Submenu 3 Application
SCREEN
OFF No image is displayed.
1 A preset image
*1
is displayed.
2
A still image stored in the internal memory or card is registered for
display. (This option leads to the setup screen.)
VOLUME
*2
OFF(No sound)/
LOW/HIGH
The volume of the startup sound is selected.
*1
This image cannot be changed.
*2
When [SCREEN] is set to [OFF], this setting is not available.
To register a startup image
1 Select [2] in submenu 3 for [SCREEN].
2 Use 9: to select the image to be registered, and press the o button.
Selecting the menu screen color [MENU COLOR]
x SETUP X MENU COLOR
Submenu 2 Application
NORMAL/COLOR 1/
COLOR 2/COLOR 3
Selects the menu screen color according to your preference.
Selecting the camera sound and its volume [SOUND SETTINGS]
x SETUP X SOUND SETTINGS
In [j SILENT MODE] (p. 63) all sounds can be set to be turned off.
Submenu 2 Submenu 3 Submenu 4 Application
BEEP
SOUND TYPE
1/2
Selects the operating sound and volume of the
camera buttons (except the shutter button).
VOLUME
OFF (No sound)/
LOW/HIGH
SHUTTER SOUND
SOUND TYPE
1/2/3
Selects the operating sound and volume of the
shutter button.
VOLUME
OFF (No sound)/
LOW/HIGH
8
OFF (No sound)/
LOW/HIGH
— Selects the warning sound volume.
q VOLUME
5 levels excluding
OFF (No sound)
— Adjusts the image playback volume.
book_d4374_en.indb 56book_d4374_en.indb 56 18/07/2008 13:39:2318/07/2008 13:39:23