Filter
Top Products
Playback on a TV
64
2
Viewing
Press or to select [NTSC] or
[PAL] and press the OK/MENU
button.
The video signal system is set.
Press the OK/MENU button again to exit
the menu.
Turn the camera and the TV off.
Plug the AV cable into the Multi-
connector on the camera.
Plug the yellow plug and the
white plug of the AV cable into
the TV video (yellow) and audio
(white) input jacks respectively.
For information on your TV audio/video
input jacks, refer to your manual of the
TV.
NTSC
PAL
VOLUME
s
X
VIDEO OUT
8
CARD EDIT PLAY
SETUP
Multi-connector