Olympus u9000 Digital Camera User Manual


 
27
EN
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Adjusting to a natural color scheme
[WB]
B CAMERA MENU X WB
: K s b A
Submenu 2 Application
AUTO
The camera automatically adjusts
the white balance according to the
shooting scene.
5
For shooting outdoors under a
clear sky
3
For shooting outdoors under a
cloudy sky
1
For shooting under tungsten
lighting
w
For shooting under daylight
uorescent lighting (household
lighting, etc.)
x
For shooting under neutral
uorescent lighting (desk lamps,
etc.)
y
For shooting under white
uorescent lighting (of ces, etc.)
Selecting the ISO sensitivity [ISO]
B CAMERA MENU X ISO
: K
Abbreviation for the International
Organization for Standardization. ISO
standards specify the sensitivity for digital
cameras and lm, thus codes such as “ISO
100” are used to represent sensitivity.
In the ISO setting, although smaller values
result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under dimly lit conditions. However,
high sensitivity introduces electrostatic noise
into the resulting picture, which may give it a
grainy appearance.
Submenu 2 Application
AUTO
The camera automatically adjusts
the sensitivity according to the
shooting scene.
HIGH ISO AUTO
The camera uses a higher
sensitivity compared to [AUTO] to
minimize blur caused by a moving
subject or by camera shake.
64/100/200/400/
800/1600
The ISO (sensitivity) setting is
xed by manually selecting it.
Shooting pictures sequentially while
the shutter button is held down
[DRIVE]
B CAMERA MENU X DRIVE
: K s
Submenu 2 Application
o
One frame is shot each time the
shutter button is pressed.
j
*1
Sequential shooting at the focus,
brightness (exposure), and white
balance that is locked in the rst
frame.
W
Sequential shooting at a higher
speed than [j].
*1
The shooting speed varies depending on the
settings for [A IMAGE QUALITY] (p. 26).
When set to [j], [R] (Sound recording)
(P. 29) is not available.
When set to [W], ash is set xed [$]
(FLASH OFF) and [ISO] is xed to [AUTO].
When set to [W], [IMAGE SIZE] is limited
to [I] or lower. Moreover, [FINE ZOOM]
(p. 28), [DIGITAL ZOOM] (p. 28), and [R]
(Sound recording) (p. 29) are not available.