Filter
Top Products
113
7
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
∫ WHITE CLIP
ON
OFF
For selecting ON/OFF of the white clip
function.
When it is set to ON, the set value for the
WHITE CLIP LVL becomes effective.
WHITE CLIP LVL 90%
:
109%
For performing the white clip level setting.
7-3-10 KNEE/LEVEL
Item
Variable
range
Remarks
MASTER PED –200
:
+015
:
+200
For performing the MASTER PEDESTAL
setting.
∫ MANUAL KNEE
ON
OFF
For setting the mode which is to be
established when the AUTO KNEE switch is
at OFF.
The KNEE POINT/SLOPE setting
value is active when ON is selected.
KNEE POINT 70.0%
:
93.0%
:
107.0%
For setting the knee point position in
increments of 0.5% steps.
KNEE SLOPE 00
:
85
:
99
For setting the inclination of the knee.
A.KNEE POINT 80%
:
93%
:
107%
For setting the auto knee point position in
increments of 0.5% steps.
When the OUTPUT/AUTO KNEE selection
switch is set to CAM.AUTO KNEE ON, this
function is enabled.
A.KNEE LVL 100
:
107
:
109
For setting the auto knee level.
A.KNEE
RESPONSE
1
:
4
:
8
For setting the auto knee response rate.
When a numerical value is larger, the
response speed is slower.
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
SCUFR
7-3-11 GAMMA
Item
Variable
range
Remarks
MASTER GAMMA 0.30
:
0.45
:
0.75
For setting the master gamma in increments
of 0.01 steps.
R GAMMA –15
:
+00
:
+15
For performing the gamma setting for Rch.
B GAMMA –15
:
+00
:
+15
For performing the gamma setting for Bch.
GAMMA MODE
SEL
HD
SD
FILM LIKE1
FILM LIKE2
FILM LIKE3
For selecting the gamma mode.
HD:
Video gamma characteristics for HD
(High Definition)
SD:
The gain in the dark section is higher than
the HD gamma.
FILM LIKE1:
The cinema gamma characteristics for
video applications are selected.
FILM LIKE2:
The cinema gamma characteristics for
video applications are selected.
In this setting gradations in highlit areas
can be expressed better than when FILM
LIKE1 is selected.
FILM LIKE3:
The cinema gamma characteristics for
video applications are selected.
In this setting gradations in highlit areas
can be expressed better than when FILM
LIKE2 is selected.
S UFR
SCUFR
SCUFR
SCUFR
SD
HD
FILM LIKE1
FILM LIKE2
FILM LIKE3
Luminance
Video level
O When the GAMMA MODE SEL item is used for FILM
LIKE3, the following settings are recommended.
MANUAL KNEE: ON
KNEE POINT : 85.0%
KNEE SLOPE : 50