Filter
Top Products
85
5
When making the white shading correction, make the
adjustment while observing the R, G, and B waveforms in the
horizontal and vertical directions with the waveform monitor.
This now completes the white shading adjustments.
The adjustment values are now stored in the non-volatile
memory so that even when the unit’s power is turned off,
there will be no further need to perform the white shading
adjustment.
Chapter 5 Preparation (continued)
11
When the lens is provided with an extender, turn on the
extender function, and repeat steps
7 to 9.
(Once the extender function is turned on, the set values
shown on the menu screen change.)
The adjustment values of the two resulting patterns–one
when the lens extender is provided and the other when it
is not provided–are stored in the unit as the data of one
lens file.