Filter
Top Products
Operating Instructions
153
7 Other Information
7.1 FACTORY DEFAULT RESET Button
There is a FACTORY DEFAULT RESET button on the side of the camera.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory
default. If you lose your user name and password, use this button to reset the
camera.
• To reset the camera, press the FACTORY DEFAULT RESET button for 1
second when the camera is on.
• The indicator blinks orange, and then turns off for 5 seconds.
Note
• The internal clock will not be reset, but the time format will return to AM/PM
mode. To change it to 24-h format, see page 67.
• See page 166 for the default settings.
• All buffered images on the internal memory are deleted when resetting the
camera to factory default. The buffered images on the SD memory card are not
deleted.
• If the camera is reset to default, all alarm logs are deleted.
• The process of resetting to default takes about 1 minute. During that time, do
not turn the power off.
FACTORY DEFAULT RESET button
(Press the button with a pointed object)