Panasonic BB-HCM511 Security Camera User Manual


 
Important Information
Network Camera (PoE Ready)
Model No.
BB-HCM511
BB-HCM515
BB-HCM531
Indoor Use Only
Indoor Use Only
Outdoor Ready
© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX16003YA KK0207CM1107 (CE)
How to Use the Documentation
This manual is written for the BB-HCM511 (Indoor Use Only), BB-HCM515
(Indoor Use Only), and the BB-HCM531 (Outdoor Ready). Available
features and operations vary slightly depending on the model. You can
confirm the model no. of your camera by checking the model no. printed on
the front of the camera.
All documentation can be found on the included CD-ROM.
Important Information (PDF format; printed version also included)
This document. Provides general information and safety instructions for
using the camera.
Installation Guide (PDF format; printed version also included)
Describes how to physically connect the camera to the power supply
and network, as well how to mount or place the camera for regular use.
Setup Guide (PDF format; printed version also included)
Describes how to set up the camera so that it can be accessed using a
PC.
Operating Instructions (HTML format)
Explains how to operate, program, and maintain the camera.
Troubleshooting Guide (HTML format)
Provides solutions for problems you may have when using the camera.
Stand-alone SD Memory Card Recording Guide (PDF format; printed
version also included)
Describes how to record images to an SD memory card without using a
PC.
Abbreviations
The Network Camera is referred to as “the camera” in this document.
The Setup CD-ROM is referred to as “the CD-ROM” in this document.
The term “SD memory card” is used in this document to refer to SD
memory cards and SDHC memory cards.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, or personal injury.
Note:
References to the AC adaptor and the AC cord apply when using the
optional BB-HCA3CE or BB-HCA3E AC Adaptor.
1. Read and understand all instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Attach the Safety Wire to the camera to prevent it from dropping.
6. After taking away the sand or the dust on the lens cover, wipe the lens
cover with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with
instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat.
9. Protect the AC adaptor cord and the AC cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point
where they exit from the unit.
10. The AC adaptor is used as the main disconnect device. Ensure that
the AC outlet is installed near the product and is easily accessible.
11. Only use attachments/accessories such as stand specified by the
manufacturer.
12. Do not touch the unit, the LAN cable, the AC adaptor, the AC adaptor
cord, or the AC cord during lightning storms.
13. Unplug the unit from power supply when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the unit has been damaged in any way, such as when the AC
adaptor, the AC adaptor cord, or the AC cord is damaged, the unit
does not operate normally, or has been dropped.
15. Prolonged exposure to direct sunlight or halogen light may damage
the image sensor.
16. For BB-HCM511/BB-HCM515: The camera is intended for indoor use
only.
For BB-HCM531: The camera features a splash-resistant body, but it
is not waterproof.
17. Keep the SD memory card (customer-provided) out of reach of
children to prevent swallowing.
18. Unplug this unit from power supply if it emits smoke, an abnormal
smell or makes unusual noise. These conditions can cause fire or
electric shock. Confirm that smoke has stopped and contact an
authorized service center.
19. The AC adaptor, the AC adaptor cord, and the AC cord are not
waterproofed, and are intended for indoor use only. The AC adaptor,
the AC adaptor cord, and the AC cord must be waterproofed for
outside use.
SAVE THESE INSTRUCTIONS
Other Information
Environment:
For BB-HCM511/BB-HCM515: Do not install the camera where the
temperature is less than +0 °C or greater than +40 °C. Allow 10 cm
clearance around the unit for proper ventilation. Avoid excessive smoke,
dust, mechanical vibration, shock, or direct sunlight.
For BB-HCM531: Do not install the camera where the temperature is less
than -20 °C or greater than +50 °C. Allow 10 cm clearance around the unit
for proper ventilation. Avoid excessive smoke, dust, mechanical vibration,
shock, or direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive
powder.
When you leave the unit unused for a long period of time, disconnect the
LAN cable (when using PoE) from the camera, or disconnect the AC
adaptor from the outlet (when using the optional AC adaptor).
If you have any problems:
Consult an authorized service center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this device.
No responsibility will be taken by our company with respect to
consequences resulting from the use, damage or both of the
camera.
Please read this document before using the product, and save this document for future
reference.