14
6XSSO\LQJWKHSRZHU
An Anton/Bauer battery pack or V-mount type battery pack and external DC power supply can be used to
power this unit.
8VLQJDQ$QWRQ%DXHUEDWWHU\
Batteries for which connection verified
Ŷ
HYTRON 50
DIONIC 90
DIONIC HC
Install the Anton/Bauer battery pack.
1.
Insert the battery pack and slide it in the
2.
direction of the arrow.
5HIHUHQFH!7RUHPRYHWKHEDWWHU\SDFN
Slide it in the opposite direction to the one in which
it was attached while keeping the release lever on
the battery holder pulled down all the way.
8VLQJD9PRXQWW\SHEDWWHU\
Batteries for which connection verified
Ŷ
ENDURA E-7S
ENDURA E-HL9
ENDURA E-10
Install the V-mount type adapter plate.
1.
Insert the battery pack and slide it in the
2.
direction of the arrow.
<Reference> To remove the adapter plate
Slide it in the opposite direction to the one in which
it was attached while keeping the release lever on
the adapter plate pulled down all the way.
<Notes>
For details on the V-mount type adapter plate,
contact the place of purchase.
When you use a V-mount type adapter plate, the
% (percent) indication cannot be displayed even
if you use a battery with a battery level display
function.
For details on how to attach the V-mount type
battery, see the instruction manual supplied with
the battery holder.
%DWWHU\SDFN
Release lever
Adapter plate
Release lever