Panasonic DMC FZ 28 Digital Camera User Manual


 
VQT1S36
114
Connecting to other equipment
Connection in the PTP mode (Windows
R
XP, Windows Vista
R
and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Connect the camera to a printer via the USB connection cable A
(supplied).
Press 3/4 to select [PictBridge(PTP)], and then
press [MENU/SET].
Note
Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause
malfunction.
A USB connection cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (DMW-AC7PP; optional)
Use a battery with a sufficient battery power or the AC adaptor (DMW-AC7PP; optional). If the
remaining battery power becomes low during USB connection, the alarm beeps. If this happens
during printing, stop printing at once. If not printing, disconnect the USB connection cable.
When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears.
Do not disconnect the USB cable while [å] is displayed.
DMC-FZ28P_PC.book 114 ページ 2008年7月2日 水曜日 午後11時14分