121
VQT1S36
Connecting to other equipment
¢ The actual magnification when the zoom is used will be 1.7 times the display.
Select [CONVERSION] on the [REC] menu. (P22)
• Refer to P93 for [CONVERSION].
Press 3/4 to select [ ], and then press [MENU/SET] to set.
• Set in same way to select [ ] too.
• Always set to [OFF] when the conversion lens is taken off.
Note
•
Lens adaptor (DMW-LA3; optional) is needed to use the conversion lens.
• MC protector (DMW-LMC46; optional) or ND filters (DMW-LND46; optional) cannot be used
together with the conversion lens. Remove them before attaching the conversion lens.
• You cannot attach a conversion lens to the hood adaptor (supplied).
• When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
• When using the tele conversion lens:
– We recommend using a tripod.
– The stabilizer function may not work sufficiently.
– The focus indication may light due to the jitter even if the subject is not focused.
– The time required for focusing may become longer than usual.
Zoom magnification
when a lens is
attached
(Max.
number of pixels)
Recordable range when
using a conversion lens
Wide Te le
Tele conversion lens 9k-18k
¢
5.5 m to ¶
Close-up
lens
Normal
3k-18k
22 cm
(0.72feet)
to
50 cm
(1.64feet)
40 cm
(1.31feet)
to
50cm
(1.64feet)
Macro
22 cm
(0.72feet)
to
50 cm
(1.64feet)
40 cm
(1.31feet)
to
50 cm
(1.64feet)
Tele-Macro —
33 cm
(1.08feet)
to 50 cm
(1.64feet)
C
DMC-FZ28P_PC.book 121 ページ 2008年7月2日 水曜日 午後11時14分