Panasonic DMC FZ 28 Digital Camera User Manual


 
37
VQT1S36
Basic
Subjects and recording conditions which are difficult to focus
Fast-moving subjects, extremely bright subjects or subjects without contrast
When the recordable range display has appeared in red.
When recording subjects through windows or near shiny objects
When it is dark or when jitter occurs
When the camera is too close to the subject or when taking a picture of both distant and near
subjects
When the jitter alert [ ] appears, use [STABILIZER] (P90), a tripod or the self-timer
(P52).
Shutter speed will be slower particularly in the following cases. Keep the camera still from the
moment the shutter button is pressed until the picture appears on the screen. We recommend
using a tripod.
Slow sync./Red-eye reduction
[NIGHT PORTRAIT] and [NIGHT SCENERY] in the advanced scene mode (P63)
In [PARTY], [CANDLE LIGHT], [STARRY SKY] or [FIREWORKS] in scene mode (P66)
When the shutter speed is slowed in [MIN. SHTR SPEED]
Pictures recorded with the camera held vertically are played back vertically (rotated). (Only
when [ROTATE DISP.] (P106) is set to [ON])
Pictures may not be displayed vertically if they were taken with the camera aimed up or down.
Pictures cannot be displayed vertically when recording motion pictures or creating flip
animations.
This unit will remember the focus point during the recording, and it can be enlarged with
that point as a center.
Press [AF#/FOCUS] during image playback.
Focus point may not be the center of enlargement when it is
at the edge of the image.
Refer to Using the Playback Zoom (P41) for operation
during zooming.
It will return to the original enlargement if [AF#/FOCUS] is
pressed again.
Following pictures cannot be enlarged because there is no
focus point:
Picture that was taken without focusing
Picture that was taken with manual focus
Picture that was taken with a different camera
In program AE mode, you can change the preset aperture
value and shutter speed without changing the exposure.
This is called program shift.
Preventing jitter (camera shake)
Direction detection function
Enlarge the focus point (display focus point)
Program shift
W T
1/30
1/30
F4.0
F4.0
6
6
DMC-FZ28P_PC.book 37 ページ 2008年7月2日 水曜日 午後11時14分