Filter
Top Products
39
VQT1S36
Basic
∫ Changing the zoom speed
You can operate the zoom at 2 speeds
depending on the rotation angle of the zoom
lever.
The zoom speed becomes slower when the
rotation angle is small and the zoom speed
becomes faster when the rotation angle is
large.
A Fast
B Slow
C Zoom lever
• Zoom speed cannot be changed in the motion picture mode (P74).
∫ Storing the zoom position (Zoom resume)
•
Refer to P27 for details.
∫ Types of zooms
•
When using the zoom function, an estimate of the focus range will appear in conjunction
with the zoom display bar. (Example: 0.3 m (0.99 ft.) –¶)
¢1 The magnification level differs depending on [PICTURE SIZE] and [ASPECT RATIO] setting.
¢2 The on-screen zoom indication may momentarily stop moving when you rotate the zoom
lever to the extreme Tele position. You can enter the digital zoom range by continuously
rotating the zoom lever to Tele or releasing the zoom lever once and then rotating it to Tele
again.
∫ Extended optical zoom mechanism
When you set the picture size to [ ] (3 million pixels), the 10M (10.1 million pixels) CCD
area is cropped to the center 3M (3 million pixels) area, allowing a picture with a higher
zoom effect.
Feature Optical zoom
Extended optical zoom
(EZ)
Digital zoom
Maximum
magnification
18k 32.1k
¢1
72k [including optical zoom
18k]
128k [including extended
optical zoom 32.1k]
Picture
quality
No deterioration No deterioration
The higher the magnification
level, the greater the
deterioration.
Conditions None
[PICTURE SIZE] with
(P79) is selected.
[DIGITAL ZOOM] (P89) on the
[REC] menu is set to [ON].
Screen
display
A
[ ] is displayed.
B The digital zoom range is
displayed.
The AF area becomes larger
when the shutter button is
pressed halfway in the digital
zoom range
¢2
.
T
W
T
W
A
T
W
T
W
B
DMC-FZ28P_PC.book 39 ページ ２００８年７月２日 水曜日 午後１１時１４分