Filter
Top Products
32 VQT2M98 VQT2M98 33
Changing recording information display
Deleting pictures
Playback Mode:
Select type of deletion
• To use
[DELETE
ALL] → go
to step
Select the pictures to delete
(Repeat)
Picture selected
•
To release
→ Press
[DISPLAY]
again
Pictures deleted will be from the card if card is inserted, or from built-in memory if the
card is not inserted. (Deleted pictures cannot be recovered.)
Press to delete displayed picture
Select [YES]
• Do not turn off
the power during
deletion.
●
Use a sufficiently charged battery or an AC adaptor (optional).
●
Pictures cannot be deleted in the following cases:
• Protected pictures
• Card switch is in ‘LOCK’ position. • Pictures not of DCF standard (→31)
●
Motion pictures can also be deleted.
●
To delete all data including protected pictures, perform [FORMAT].
Delete
Select [YES]
• To cancel → press [MENU/SET].
• May take time depending on
number of pictures deleted.
• [ALL DELETE EXCEPT
] may
be selected in [DELETE ALL] when
[FAVORITE] is set to [ON] (→70)
and pictures have been registered.
To delete multiple (up to 50) or all pictures
(after step )
[DISPLAY]
You can switch between various information shown on the LCD monitor, such as guide
lines and recording information.
■
Guide lines
• Reference for composition (e.g. balance) when
recording.
●
During playback zoom, Motion Picture Playback, Slide Show: Display on/off
●
During menu display, Multi playback or Calendar playback: Display cannot be changed.
●
Guide lines are not displayed in [PHOTO FRAME] Scene Mode.
Press to change display
●
In Recording Mode
Recording information No display Guide lines
●
In Playback Mode
Picture information Picture information +
Recording information
No display