Filter
Top Products
VQT2G44
80
Advanced (Recording pictures)
Note
• [ ] is displayed in white balance icon in the LCD monitor/optional external viewfinder when
the White Balance Bracket is set.
• The White Balance Bracket setting is released when the power has been turned off (including
power save mode).
• Pictures can be taken with White Balance Bracket regardless of the drive mode settings.
• You will only hear the shutter sound once.
• White Balance Bracket cannot be set when the [QUALITY] is set to [ ], [ ], or [ ].
• White Balance Bracket will be disabled when the Multi Film Bracket is set.
• White Balance Bracket does not work when recording motion pictures.
[REC] mode:
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Press 3 ().
Press 3/4/2/1 to select the ISO sensitivity and
then press [MENU/SET] to set.
• You can also use the rear dial to set.
• You can also press the shutter button halfway to set.
ISO sensitivity
100 3200
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
ISO sensitivity
Settings
AUTO
¢
The ISO sensitivity is automatically adjusted according to the
brightness.
¢
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
100/200/400/800/1600/3200
The ISO sensitivity is fixed to various settings.
(When the [ISO INCREMENTS] in [REC] mode menu
(P120) is set to [1/3 EV], items of ISO sensitivity that can
be set will increase.)
DMC-GF1KPP-VQT2G44_eng.book 80 ページ ２００９年８月１７日 月曜日 午後１時１９分