Filter
Top Products
33
VQT2A80
Preparation
• Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].
• [POWER SAVE] is set to [5MIN.] in the Intelligent auto mode.
• [POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
• Press any button to turn on the LCD monitor again.
• It is recommended to use this mode with [LVF/LCD AUTO] (P127) in the [CUSTOM MENU]
menu is set to [OFF].
• [ECONOMY] does not work in the following cases.
– When using the AC adaptor
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
• If [REVIEW] is set to [HOLD], the playback screen display can be switched (P56) during auto
review when taking pictures with the drive mode lever set to [ ] (P50) or [ ] (P75).
• When [HOLD] has been selected, the zoom time cannot be set.
• The auto review function is activated regardless of its setting when using burst mode (P71) or
auto bracket (P73) and when recording still pictures with audio (P124). (Will not enlarge/hold)
Also, you cannot set the auto review function.
• If [HIGHLIGHT] (P33) is set to [ON], white saturated areas appear blinking in black and white
when the auto review function is activated.
• [AUTO REVIEW] does not work in recording motion pictures.
• If there are any white saturated areas, we
recommend compensating the exposure towards
negative (P70) referring to the histogram (P63) and
then taking the picture again. It may result in a better
quality picture.
• There may be white saturated areas if the distance
between the camera and the subject is too close
when taking pictures with the flash.
If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will
become white saturated and appear blinking in black and white.
• This does not work while in multi playback (P56), calendar playback (P57), or playback zoom
(P57).
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[REVIEW]:
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed
halfway.
[ZOOM]:
The picture enlarged 4M is displayed.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HIGHLIGHT]
When the auto review function is activated or when playing back,
white saturated areas appear blinking in black and white.
[OFF]/[ON]
[ON] [OFF]