Filter
Top Products
23
Using the LCD Monitor
Every time you press the [DISPLAY]
button, the display of the LCD monitor
changes as shown below.
[In recording]
[In playback]
• Only in REC mode settings are kept, even if you turn the power off.
• When setting the digital zoom to [ON], the display of the LCD monitor is not set to off.
• When setting the auto review to [ON], it is available even if the display of the LCD
monitor is set to off. (After finishing the auto review, the display is returned to off)
• After recording, if you press the [REVIEW/SET] button, the review is displayed, even if
the LCD monitor is set to off. (After finishing the review, the display is returned to off)
The Indicators
ª
Status Indicator (Green)
1
[Blinking]
Warning indication
[Lighting]
When turning the power switch to [ON]
ª
Flash/Access Indicator (Red)
2
[Blinking]
When charging the flash
When setting the flash mode to forced off
and recording in dark places
[Lighting]
When accessing the card
When firing flash (It lights when the shutter
is pressed halfway)
DISPLAY