Filter
Top Products
Preparation
16
Inserting/Removing the Batteries
Preparation
• Check that the camera is turned off and that the lens is retracted.
• Use AA Ni-MH batteries (nickel-metal hydride) or AA Alkaline batteries.
1
Slide the door in the direction of
the arrow to open the battery door.
2 Insert the batteries observing the
direction of the + and -
polarities.
3
Slide the door in the direction of
the arrow to close the battery door.
¬
Suggestions/Tips
¬
• If you will not be using the camera for
a long time, remove the batteries.
• After the fully charged batteries or new
batteries have been inserted for more
than 3 hours, the clock setting is
stored (in the camera) for 3 months
after the batteries are removed. (The
time may be shorter if the batteries are
not charged sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case,
set the clock again. (P19)
• Do not remove the card or the
batteries when the card is being
accessed. (P17)
• Be sure to remove the batteries
after the power indicator is turned
off. Otherwise, the setting may be
cleared.
LC70_50GN.book 16 ページ ２００４年２月２０日 金曜日 午後１時５７分