142
VQT2M75
Do not use the unit for surveillance
purposes or other business uses.
≥ This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in
prolonged use.
≥ In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit
for an extended time
≥ When storing the unit in a cupboard or
cabinet, it is recommended that you place
a desiccant (silica gel) in with it.
When disposing of or giving away this
unit, note that:
≥ Formatting and deletion simply change the
file management information and cannot
be used to completely erase the data in
built-in memory or HDD of this unit. The
data can be recovered using commercially
available software or the like.
≥ We recommend that you physically format
the built-in memory or HDD before
disposing of or giving away this unit.
To physically format the built-in memory,
connect the unit via the AC adaptor, select
[FORMAT MEDIA] # [Built-inMemory]
from the menu, and then press and hold
the delete button on the screen below for
about 3 seconds. When the built-in
memory data deletion screen appears,
select [YES], and then follow the on-
screen instructions.
To physically format the HDD, connect the
unit via the AC adaptor, select [FORMAT
MEDIA] # [HDD] from the menu, and then
press and hold the delete button on the
screen below for about 3 seconds. When
the HDD data deletion screen appears,
select [YES], and then follow the on-
screen instructions.
≥ Please look after the data in your built-in
memory or HDD carefully. Panasonic will
not be held responsible in the unlikely
case that private data is divulged.
The battery used in this unit is a
rechargeable lithium-ion battery. It is
susceptible to humidity and temperature and
the effect increases the more the
temperature rises or falls. In cold areas, the
full charge indication may not appear or the
low battery indication may appear about
5 minutes after starting use. At high
temperatures, the protection function may
be triggered, making it impossible to use the
unit.
Be sure to detach the battery after use.
≥ If the battery is left attached, a minute
amount of current continues to flow even if
the unit’s power is off. Keeping the unit in
this state may result in over discharge of
the battery. This may result in you not
being able to use the battery even after it
is charged.
≥ The battery should be stored in the vinyl
bag so metal does not come into contact
with the terminals.
≥ The battery should be stored in a cool
place free from humidity, with as constant
About the battery
HDC-TM700&HS700P&PC-VQT2M75_mst.book 142 ページ 2010年2月23日 火曜日 午前10時34分