Filter
Top Products
26
Viewfinders
Using the LCD monitor
1
Set the camera recorder’s POWER switch to
ON.
2
Press the OPEN button in the direction of the
arrow 1 to open the LCD monitor.
3
Position the LCD monitor where its screen
images can be seen most comfortably.
OThe LCD monitor can be rotated up to 180
degrees toward the lens and up to 90
degrees toward you.
Forcing it beyond these angles or
closing it while it is still in the rotated
position may cause the camera
recorder to malfunction.
7
Press the MENU button three times to
release the menu mode.
180° 90°
1
2
OWhen closing the LCD monitor, ensure that
it is closed properly.
OWhen the LCD monitor has been turned
toward the lens (for face-to-face shooting),
both the viewfinder and LCD monitor light
up at the same time.
4
Select YES as the setting for the LCD/EVF
SET item on the setting menu DISPLAY
SETUP screen.
OFor details on the menu operations, refer
to page 37.
5
Select the LCD BRIGHTNESS item, and tilt
the OPERATION lever in the 3 or 4
direction to adjust the screen’s brightness.
(If the remote control unit is used, press the
“M” button among the SET buttons.)
[–]
????
––––
[+]
LCD COLOR LEVEL
[–]
????
––––
[+]
EVF BRIGHTNESS
[–]
????
––––
[+]
PUSH MENU TO RETURN
LCD BRIGHTNESS
LCD/EVF SET
6
Select the LCD COLOR LEVEL item, and tilt
the OPERATION lever in the 3 or 4
direction to adjust the screen’s color level.
(If the remote control unit is used, press the
“M” button among the SET buttons.)
LCD BRIGHTNESS
[–]
????
––––
[+]
[–]
????
––––
[+]
EVF BRIGHTNESS
[–]
????
––––
[+]
PUSH MENU TO RETURN
LCD COLOR LEVEL
LCD/EVF SET