Filter
Top Products
The setting for progressive mode can be
switched with the PROGRESSIVE item on
the SCENE FILE screen of the setting menu.
(See page 39)
The luminance level of artificial lighting—
particularly that of fluorescent lights and
mercury lamps—changes in synchronization
with the power line frequency. Especially in
areas with a power line frequency of 50 Hz, the
vertical sync frequency (approx. 60 Hz) of the
camera recorder and frequency of the lighting
(50 Hz) will interfere with each other, possibly
causing the white balance to change cyclically.
When shooting under artificial lighting or when
adjusting the white balance, set the shutter
speed as shown below.
Progressive mode
Shutter speed
60 Hz50 Hz
OFF (60i) 1/100 OFF (1/60)
30P OFF (1/50) 1/60
24P/24PA OFF (1/50) 1/60
Progressive mode
Standard (OFF)
shutter speed
Shutter speeds which can be selected using SPEED SEL button
Shutter speed settingsSYNCHRO SCAN
OFF (60i) 1/60 1/100, 1/120, 1/250, 1/500, 1/1000, 1/20001/60.3 --- 1/250
30P 1/50
1/30, 1/60, 1/120, 1/250, 1/500, 1/1000
1/24, 1/60, 1/120, 1/250, 1/500, 1/1000
1/30.1 --- 1/250.0
24P/24PA 1/50 1/24.1 --- 1/250.0
29
Setting the electronic shutter
1
Each time the SHUTTER button is pressed,
the standard (OFF) shutter speed and the
shutter speed selected by the SPEED SEL
button are selected alternately.
2
After pressing the SHUTTER button, press
the SPEED SEL button to select the shutter
speed.
Each time the SPEED SEL button is
pressed, the shutter speed changes by one
setting in the following sequence.
When the progressive mode is OFF (60i)
In the progressive mode (30P, 24P or 24PA)
OThe higher the shutter speed, the lower
the sensitivity of the camera.
OWhen the iris is controlled automatically, it
opens more and more and the depth of
focus becomes shallower and shallower
as the shutter speed increases.
SYNCHRO
SCAN
(1/24)
1/30
1/5001/1000
1/60 1/120
1/250
SYNCHRO
SCAN
1/100
1/10001/2000
1/120 1/250
1/500
Shutter speeds which can be set
Synchro scan
The shutter speed of synchro scan used when
shooting TV screens or computer monitor
screens is set using the SYNCHRO SCAN item
on the setting menu CAMERA SETUP screen.
(See page 40)
OWhen the shutter is adjusted to suit the
frequency of a TV screen or computer
monitor screen, the horizontal noise that
occurs when shooting TV screens is
minimized.
OWhen the progressive mode is set, TV
screens which have been played back with
the PAL system can be shot as well.
If a setting other than OFF has been selected for the OTHER
DISPLAY item on the setting menu DISPLAY SETUP screen,
the current shutter speed setting is displayed in the viewfinder
and on the LCD monitor. However, it is not displayed if the
standard (OFF) shutter speed has been set.
1/
100