Filter
Top Products
37
Setting menus
The camera recorder’s settings can be changed
to suit the scenes to be shot or what is to be
recorded using the setting menus.
Operation method
1
In any operation mode except the shooting
mode or recording mode, press the MENU
button.
The menu mode is established, and the
function screen shown below appears in the
viewfinder and on the LCD monitor.
2
Tilt the OPERATION lever in the 3 or 4
direction, and move the highlighted part to
the function which is to be set.
(If the remote control unit is used, press the
“V” or “B” button among the SET buttons.)
2.CAMERA SETUP
3.SW MODE
4.AUTO SW
5.RECORDING SETUP
6.DISPLAY SETUP
7.OTHER FUNCTIONS
PUSH MENU TO EXIT
1.SCENE FILE
CAMERA MENU
[Camera mode]
2.RECORDING SETUP
3.AV IN/OUT SETUP
4.DISPLAY SETUP
5.OTHER FUINCTIONS
PUSH MENU TO EXIT
1.PLAYBACK FUNCTIONS
VCR FUNCTIONS
[VCR mode]
3
Press “;” of the OPERATION lever, and
display the setting item.
(If the remote control unit is used, press the
“M” button among the SET buttons.)
H
VVCCRR11 VVCCRR22
OOFFFF
DV CONTROL
H
OFF
DV CMD SEL
H
REC P
REC LAMP
H
BOTH
BEEP SOUND
H
ON
;
PUSH MENU TO RETURN
REMOTE
OTHER FUNCTIONS
Example:
4
Tilt the OPERATION lever in the 3 or 4
direction, and move the highlighted part to
the function which is to be set.
(If the remote control unit is used, press the
“V” or “B” button among the SET buttons.)
REMOTE
H
VCR1
DV CONTROL
H
OFF
DV CMD SEL
H
REC P
OOFFFF FFRROONNTT
RREEAARR
H
BBOOTTHH
BEEP SOUND
H
ON
;
PUSH MENU TO RETURN
REC LAMP
OTHER FUNCTIONS
Example:
5
Press “;” of the OPERATION lever, and
move “
1
” to the setting which is to be
changed.
(If the remote control unit is used, press the
“M” button among the SET buttons.)
To change a numerical value, for example,
move “
1
” to the position of the value to be
changed, tilt the OPERATION lever in the 3
or 4 direction, and change the setting.
(If the remote control unit is used, press the
“V” or “B” button among the SET buttons.)
6
To change another item, repeat steps 4 and
5.
To exit the settings, press the MENU button
to return to the function screen.
7
To change another function, repeat steps 2
to 5.
To exit the menu mode, press the MENU
button to return to the normal screen.
REMOTE
H
VCR1
DV CONTROL
H
OFF
DV CMD SEL
H
REC P
OOFFFF
H
FFRROONNTT
RREEAARR BBOOTTHH
BEEP SOUND
H
ON
;
PUSH MENU TO RETURN
REC LAMP
OTHER FUNCTIONS
Example: