Filter
Top Products
15
Before Use
1
Slide the Battery downward while
sliding BATT RELEASE to remove the
Battery Pack. (p. 14)
2
Insert the DC Cable into the DC IN
Terminal.
3
Connect the other end of the DC
Cable to the AC Adaptor as shown.
4
Plug in the AC Adaptor.
• The POWER Lamp on the AC
Adaptor lights up.
• When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor consumes
1 W of electric power when plugged into
an AC outlet even when not in use.)
DC Cable
(Supplied)
DC IN Terminal
Note
1
2
3
POWER
Lamp
Supplying Power
Caution:
• Charge only with specified charger.
• Charge the Battery within an ambient
temperature range of 10 °C (50 °F) and
30 °C (86 °F).
• The Battery may be warm after charging or just
after use. This is normal.
• Do not use an insufficiently charged or worn out
Battery.
• If charging is done in extreme low or high
temperatures, Battery charge time increases.
Safety precautions:
• Do not place the Battery near, or dispose of in fire.
• Do not directly connect (short circuit) the positive
(+) and negative (–) terminals.
• Never attempt to disassemble or reassemble the
Battery.
To avoid damage to the Battery:
• Do not drop or jar the Battery.
• Use the Battery with specified models only.
• If the Battery is used in extremely high
temperatures, a safety device will automatically
prevent operation.
To insure longer battery life:
• While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place. If you leave the Battery in
the Palmcorder or on the AC Adaptor, the Battery
will no longer be rechargeable.
• Keep the Battery terminals clean.
Battery Care
DC Output Connector
2
3
Use AC Adaptor
BATT RELEASE
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
U.S.A. CONSUMERS: ATTENTION:
1
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
19