Filter
Top Products
-46-
1. Preparations
(1) Procure a ceiling mount bracket.
(2) Installation Surface
CAUTION: Consult an expert on the load bear-
ing capacity of the installation surface and
structure. If the surface is not strong enough,
the camera may fall down. Refer to the prod-
uct specifications for weights.
Prepare appropriate hardware (e.g. wall nuts,
anchor bolts, etc.) for fixing on the installation
surface.
2. Disassembling the Camera
(1) Remove the upper base from the camera by
loosening 3 screws. Turn the upper base and
separate it.
(2) Remove the attachment pipe from the upper
base by loosening 4 screws.
3. Mounting the Bracket
(1) Fix the bracket to the installation surface using
appropriate bolts, nuts or the like (not supplied).
(2) Fix the attachment pipe to the bracket.
(3) Thread cables through the bracket. Connect
cables, referring to CONNECTIONS.
(4) Fix the upper base to the attachment pipe using
4 screws, and fill the gap between the bracket
and attachment pipe with waterproof material
such as silicon clay. See instructions of the
bracket for details.
x3
x4
Attachment Pipe
Cables
Upper Base
Upper Base
x4 Screws
Waterproof Material