Filter
Top Products
-27-
Connection type 2 IP address Set the IP address designated by your network administrator.
However, the setting is not required if DHCP is used in an
intranet.
Subnet mask Set the subnet mask designated by your network administra-
tor.
However, the setting is not required if DHCP is used in an
intranet.
Default gateway Set the IP address of the default gateway designated by your
network administrator.
However, the setting is not required if DHCP is used in an
intranet.
Network speed Set the network speed.
Use the default setting “auto” for the network speed.
Selectable parameters: auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10
Mbps (half duplex)
HTTP port Use the default setting “80” for the HTTP port.
Host name Refer to your network administrator and set the designated
host name if required.
DNS Set to ON when using the DNS server.
Primary server No setting required
Secondary server Set the IP address of DNS when using the DNS server.
Refer to your Internet service provider for the IP address of
DNS. Primary and secondary IP addresses can be set for the
DNS.
DHCP Set to ON if the intranet uses DHCP.
Connection type 3 IP address Set the IP address designated by your Internet service
provider.
However, the setting is not required if your Internet service
provider uses a DHCP server (the DHCP server assigns an
IP address to the camera automatically).
Subnet mask Set the subnet mask designated by your Internet service
provider.
However, the setting is not required if your Internet service
provider uses a DHCP server (the DHCP server assigns an
IP address to the camera automatically).
Default gateway Set the default gateway designated by your Internet service
provider.
Network speed Set the network speed.
Use the default setting “auto” for the network speed.
Selectable parameters: auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10
Mbps (half duplex)
HTTP port Use the default setting “80” for the HTTP port.
Host name Refer to your Internet service provider and set the designated
host name if required.
DNS Set to ON when using the DNS server.
Primary server No setting required