Pandigital Version: PAN.1 Digital Photo Frame User Manual


 
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of
fire, electric shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
Warning: To prevent the risk of electric shock, do not remove the cover. There are no user-serviceable
parts inside. Refer all servicing to qualified personnel.
The Digital Photo Frame is for indoor use only.
Unplug the Digital Photo Frame before performing care and maintenance.
Do not block the ventilation holes on the back of the digital photo frame at any time.
Keep your Multimedia Digital Photo Frame out of direct sunlight and heat sources.
Protect the power cord. Route power cords so that they are not likely to be walked on or pinched by
items placed on or against them. Pay particular attention to the point where the cord attaches to the
Digital Photo Frame.
Only use the AC adapter included with the Digital Photo Frame. Using any other power adapter will void
your warranty.
Unplug the power cord from the outlet when the unit is not in use.
Cleaning the LCD Screen
Treat the screen gently. The screen is made of glass and can be scratched or broken.
To clean fingerprints or dust from the LCD screen, we recommend using a soft, non-abrasive cloth such
as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD Cleaning Kit, do not apply the cleaning liquid directly to the LCD screen.
Clean the LCD screen with cleaning cloth moistened with the liquid.
Cleaning the Digital Photo Frame
Clean the outer surface of the Digital Photo Frame (excluding the screen) with a soft cloth dampened
with water.