Filter
Top Products
Pelco Manual C1498M-A (7/99) 15
SHARPNESS
The two modes for adjusting the picture sharpness are automatic and manual. To change
the mode:
1. On the main menu, move the joystick up or down to position the cursor (>) beside Camera.
2. Press the Iris Open button to enter the Camera submenu.
3. Move the joystick up or down to position the cursor beside Next.
4. Press the Iris Open button to go to the next camera submenu.
5. Move the joystick up or down to position the cursor beside Sharpness.
6. Press the Iris Open button. Another menu appears with the auto sharpness and
sharpness selections.
7. Move the joystick up or down to position the cursor beside one of the choices. Press
the Iris Open button.
AUTO SHARPNESS - Move the joystick up or down to toggle between the On and Off
choices. Press the Iris Open button to select one, or press the Iris Close button if you do
not want to change the setting.
SHARPNESS - Move the joystick up or down to a value. As you change the value, you
can see the sharpness change. Press the Iris Open button to select the value, or press the
Iris Close button if you do not want to change the setting. If Auto Sharpness is on, it
changes to off when you select a new value.
WHITE BALANCE
The three white balance settings are auto, red-blue, and magenta-green. To change the
white balance setting:
1. On the main menu, move the joystick up or down to position the cursor (>) beside Camera.
2. Press the Iris Open button to enter the Camera submenu.
3. Move the joystick up or down to position the cursor beside Next.
4. Press the Iris Open button to go to the next camera submenu.
5. Move the joystick up or down to position the cursor beside White Balance.
6. Press the Iris Open button. Another menu appears with the auto, red-blue, and
magenta-green selections.
7. Move the joystick up or down to position the cursor beside one of the choices. Press
the Iris Open button.
AUTO WHITE BALANCE - Move the joystick up or down to toggle between the Auto
and Off choices. Press the Iris Open button to select one, or press the Iris Close button if
you do not want to change the setting.
R-B WHITE BALANCE - Move the joystick up or down to a value. As you change the
value, you can see the color change on your monitor. Press the Iris Open button to select
the value, or press the Iris Close button if you do not want to change the setting. If Auto
White Balance is on, it changes to off when you select a new value.
M-G WHITE BALANCE - Move the joystick up or down to a value. As you change the
value, you can see the color change on your monitor. Press the Iris Open button to select
the value, or press the Iris Close button if you do not want to change the setting. If Auto
White Balance is on, it changes to off when you select a new value.
POWER-UP MODE
This feature lets the dome resume a desired condition following power-up. The menu
includes the following choices:
• Default – On power-up, the dome goes through a configuration cycle and stops at zero
reference, showing “Configuration Done,” and address and mode settings on the screen.