Pelco Manual C1498M-A (7/99) 19
SPECIFICATIONS
MECHANICAL
Pan Movement: 360° continuous pan rotation
Vertical Tilt: Unobstructed +2° to -92°
Manual Pan Speed: 0.5°-80°/sec manual operation, 150°/sec turbo
Manual Tilt Speed: 0.5°-40°/sec
Preset Speeds
Pan: 250°/sec
Tilt: 200°/sec
Fixed-Speed Controller
Pan: 30°/sec
Tilt: 12°/sec
CAMERA
Signal Format: NTSC (Spectra Lite™ model DD5T-C)
PAL (Spectra Lite™ model DD5T-C-X)
Scanning System: 2:1 interlace
Image Sensor: 1/4-inch interline transfer
Effective Pixels
NTSC: 510 (H) x 492 (V)
PAL: 500 (H) x 582 (V)
Resolution: >330 TV lines
Lens
Minimum f-stop: F1.6-2.8 (NTSC), f1.6-2.5 (PAL)
Focal Length: 4 mm to 48 mm optical
Zoom Ratio: 12X optical zoom
Horizontal Angle
of View: 47° (at 4 mm wide zoom), 4° (at 48 mm telephoto zoom)
MTBF: >2 million cycles at room temperature (zoom, focus, iris)
Focus: Manual with capability to focus when going to a present position
Sensitivity
NTSC: 4 lux at f1.6 at signal level of 40 IRE (NTSC), gain high
PAL: 3 lux at f1.6 at 300 mV
Signal Process: DSP-3R
Sync System: Internal
White Balance: Automatic with manual override*
Shutter Speed: Automatic (electronic iris)/manual: 1/100 – 1/30,000*
Iris Control: Automatic with manual override*
Gain Control: Automatic with manual override*
Video Output: .714 V ±.07 V (100 IRE ±10 IRE)
Signal to Noise: >46 dB
* Manual control over camera setup functions depends on the head end and is not
available on all control models.
(Design and product specifications subject to change without notice.)