Filter
Top Products
30 C1640M-B (3/06)
f. Enter ip helper-address 10.3.0.10 to specify where to forward DHCP requests. (In this example, the SM5000 is providing DHCP
service for the Endura network.
6. Enter exit to exit the VLAN configuration mode.
7. Enter write memory to save your configuration.
EXAMPLE CONFIGURATION FILE FOR SWITCH B
Figure 14 shows an example of the configuration file for switch B.
Figure 14. Example of a Configuration File
; J4850A Configuration Editor; Created on release #E.08.44
hostname “HP ProCurve Switch 5304XL”
module 2 type J4907A
ip routing
snmp-server community “public” Unrestricted
vlan 1
name “DEFAULT_VLAN”
untagged B16
ip address 10.1.0.2 255.255.0.0
no untagged B1-B15
exit
vlan 3
name “VLAN3”
untagged B1-B15
ip address 10.3.0.1 255.255.0.0
ip helper-address 10.3.0.10
ip igmp
exit
ip multicast-routing
router rip
exit
router pim
exit
vlan 1
ip rip
ip pim all
exit
vlan 3
ip rip
ip pim all
exit