Filter
Top Products
6 C1640M-B (3/06)
ENDURA COMPONENTS
Endura components take full advantage of leading edge technologies such as Universal Plug and Play (UPnP
™
), allowing for fast, error-proof
installations and set up. Essentially, when an Endura device is added to a system, it announces itself and the services it has available.
The existing devices acknowledge the new unit and then begin exchanging information as user preferences and profiles dictate.
Table A lists the Endura components. Information in this table is updated periodically and might not describe the latest Endura products.
ENDURA PRODUCT SUPPORT
Pelco provides 24-hour, seven-day-a-week product support designed to assist any customer with a technical problem involving Pelco equipment;
just dial (800) 289-9100 or (559) 292-1981 and ask for technical assistance.
Table A. Endura Components
Endura Component Description
NET5301T encoder The NET5301T encoder is a high-performance MPEG4 video encoder. It accepts analog video and audio
signals and converts them into digital TCP/IP packets, as well as provides an interface for relays and
alarms.
NET5301R decoder The NET5301R is a high-performance video decoder. It converts digital video and audio streams back
into video output for viewing on a composite, S-Video, or VGA monitor.
WS5050 workstation The WS5050 Endura workstation (WS) is a Windows
®
-compatible system that is used for viewing video
and configuring an Endura system. The WS5050 is supplied with all PC hardware in a stand-alone box.
VCD5000 video console display The VCD5000 video console display (VCD) is a high-performance, multiple-stream decoding unit. It
converts multiple digital MPEG4 streams into video signals to be viewed on either composite, S-Video,
or VGA monitors. Up to four decoding cards can be added to this unit. Four models are available that
allow users to tailor their viewing systems with up to 64 displays. An unlimited number of video
console displays (VCDs) and decoders can be controlled from a single VCD. Using an Endura keyboard
or a standard USB-compatible PC mouse and keyboard, users can access the on-screen menus and
control an Endura system.
SM5000 system manager The SM5000 system manager (SM) is an integrated hardware/software component that provides
distributed administration of multiple devices. The SM5000 also manages system security, functioning
as a key server for user and device authentication.
NVR5100 Series network video recorder The NVR5100 Series network video recorder (NVR) represents a whole new generation of flexibility and
integration for network-based video system recording. It sits at the center of Endura, Pelco’s most
advanced integrated video security system. The NVR represents the state of the art in scalability,
features, and reliability.
The NVR5100 is capable of continuous, scheduled, alarm/event, and motion recording. Pre- and post-
alarm, event, and motion recording is also available and is fully programmable on a per-channel basis.
The unit maximizes storage efficiency using EnduraStor
™
, a time- and priority-based system that
identifies data to be removed when storage reaches capacity.
SEB5000 storage expansion box The SEB5000 storage expansion box (SEB) is a high-performance storage solution. Each SEB box can
add up to 3.9 TB of network storage. Multiple SEBs can be attached to a single NVR unit, providing a
very large, very scalable network storage solution.
EnduraStor storage optimization EnduraStor offers the ability to reduce the frame rate of previously recorded video on an Endura system
after a specified period of time. After captured video has reached a user-defined age, EnduraStor goes
to work to “prune” the database and reduce the number of recorded frames. By enabling EnduraStor
within the system, a user has the unique ability to dramatically extend recording duration at a lower
frame rate.