Pelco C1969M-A Security Camera User Manual


 
2 Pelco Manual C1969M-A (1/02)
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6 or 6P encolsure, it is designed for indoor use only
and it must not be installed where exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. When used with the CCQ1400A-4 cameras with audio, the Pelco PCMQ14A Observation System is capable of being used as a
two-way intercom system. Applications other than the intended use as a two-way intercom communications system may vio-
late Federal wiretapping laws. No systems may be used to monitor audio without the express knowledge of the parties
being monitored. A warning notice has been included as a part of this manual. Photocopying of this notice is permitted and en-
couraged. Signs
must
be posted and plainly visible at all entrances to public and private premises utilizing the PMCQ14A/
CCQ1400A-4 intercom system. Pelco assumes no liability for equipment being used for purposes other than the intended use
as a two-way intercom system.
5. Do not attempt to disassemble the unit.
6. Do not remove screws or cover.
7. There are no user-serviceable parts inside.
8. Do not install any of the system parts where they will be exposed to water, excessive dust or excessive vibration.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.
This symbol indicates that dangerous volt-
age constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.