Filter
Top Products
C2433M-D (9/06) 9
3. Attach the trim ring leash to the T-shaped sheet metal tab on the retaining ring of the lower dome. Tuck the end of the trim ring leash
behind the raised sheet metal stop, and make sure the leash will hold the lower dome.
Figure 5. Attaching the Trim Ring Leash
4. Remove the two mounting screws. Apply a drop of Loctite threadlocker #222 (supplied) to each screw. Line up the mounting screw holes,
push the lower dome inside the back box, and reinstall the mounting screws.
Figure 6. Installing the Lower Dome
LEASH
MOUNTING
SCREW HOLES
FRONT & BACK
ATTACH
LEASH TO
SHEET
METAL TAB