Filter
Top Products
12 C2443M-C (1/04)
SYSTEM INFORMATION
The system Information screen displays dome drive model, software version, available memory,
and other diagnostic information.
System settings cannot be changed using this screen. This screen is for reference only.
Use the following steps to display the System Information screen:
1. Use the joystick to position the cursor beside SYSTEM INFORMATION.
2. Press Iris Open. The SYSTEM INFORMATION window opens.
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
DOME DRIVE MODEL DD53M22
BACK BOX MEMORY AVAILABLE
SOFTWARE VERSION XX.X
BIOS VERSION XX.X
FONT VERSION XX.X
COMM 2400, N, 8, 1
D ADDRESS 1
P ADDRESS 2
CM9500 MODE OFF
32 PRESETS OFF
PROTOCOL C
PRESSURIZED* X.XX
<ADDITIONAL>
SYSTEM INFORMATION
BACK
EXIT
FREE MEMORY 18304
LAST RESET POWER ON
AZIMUTH ZERO OFFSET 0
o
MOTOR ACTIVE YES
CAMERA ACTIVE YES
FPGA VERSION X
VIDEO LEVEL NORMAL
CAMERA XXXX-XXXX
LANGUAGE 1 ENGLISH X.XX
LANGUAGE 2 ESPANOL X.XX
LANGUAGE 3 PORTUGUES X.XX
LANGUAGE 4 DEUTSCH X.XX
LANGUAGE 5 FRANCAIS X.XX
LANGUAGE 6 ITALIANO X.XX
ADDITIONAL
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.