Filter
Top Products
C2443M-C (1/04) 41
<Clear>
Use this setting to clear user-defined settings or return the dome to factory default settings.
The following are the available CLEAR settings:
ALL ZONES - Clears all zones. To clear a single zone, refer to the
Zones
section.
ALL PRESETS - Clears all presets. To clear a single preset, refer to the
Presets
section.
ALL PATTERNS - Clears all patterns. To clear a single patterns, refer to the
Patterns
section.
ALL WINDOW BLANKING - Clears all blanked windows. To clear a single blanked window,
refer to the
Window Blanking
section.
RESTORE FACTORY DEFAULTS - Restores all camera settings to factory default settings.
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL WINDOW BLANKING
RESTORE FACTORY DEFAULTS
BACK
EXIT
CLEAR
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
(See page 9)
Quick Programming Guide
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.