Filter
Top Products
C2443M-C (1/04) 5
WELCOME
Thank you for purchasing Pelco’s premier integrated dome system, Spectra III SE. Your new
system features a high resolution, monochrome camera with programmable dome drive
software.
This manual is designed to be a reference tool for the operation and programming of your
system. Inside you will find information about Spectra III SE’s features and commands, as well
as a detailed menu tree.
Getting Started
You will need to install your dome system before using this manual. Refer to the installation
packet supplied with the back box for installation instructions.
Once installed apply power to the Spectra III SE dome system. The system will start a configura-
tion sequence. When configuration is done, the following information is displayed:
Pelco Spectra III SE
*Version X.XX
D Address: 1
P Address: 2
Comm 2400, N, 8, 1
CONFIGURE DONE
This information will remain on the monitor until dome operation begins.
Refer to the following pages to learn how to operate and program your dome system.
* Pressurized Spectra III SE dome systems require software version 1.25 or higher to monitor
temperature, pressure, and dew point.