PELCO Manual C290M-A (6/99) 9
8.1 MECHANICAL PARTS LIST
The following parts list corresponds to the exploded assembly diagram in Figure 9.
Item No. Quantity Description Part Number
1 2 Bushing, delrin 3/8" ID x 5/8" OD 80010004
2 2 Push nut, .625" OD 80010011
3 1 Bracket, drive mount, upper 8004034COMP
4 1 Connector, receptacle, 25 position CON10J025Z41T
5 1 Bracket, spindle, fixed mount 8004037COMP
6 1 Tilt table, fixed mount 8004021COMP
7 1 Frame 8", fixed mount 8004022COMP
8 2 Pin, latch, dome drive 8004145COMP
9 1 Dome, 8-1/2", acrylic
Black opaque w/smoked viewing window 80810011-0
Black opaque w/clear viewing window 80810011-1
Chrome finish f/2 80810011-2
Gold finish f/2 80810011-3
10 2 Ball stud PT180410000
11 2 Knob, grey, 1/4-20 tapped CM1610003
12 2 Receiver, ball stud PT180410001
13 6 Pin, crimp, loose piece (not shown) CON66107-2
(for use with item #4)
14 1 Connector, BNC, crimp, for RG174 coax CONCPM88-174
(not shown)
8.2 ASSOCIATED HARDWARE
Item No. Quantity Description Part Number
A 2 Screw 1/4-20 x 1" flat hd phil, SS ZH1/420X1.00SFS
B 1 Screw 1/4-20 x 1" soc hd c/s,SS ZH1/420X1.00SS
C 1 Nut, lock, hex, 1/4-20, nylon insert, SS ZH1/420NUTCHN
D 2 Screw 6-32 x 3/8" pan hd phil, SS ZH6-32X.375SPP
E 4 Washer, internal star #6, SS ZH6LWSIS
F 2 Screw 6-32 x 1/2" pan hd phil, SS ZH6-32X.500SPP
G 4 Screw 8-32 x 1/2" pan hd phil, SS ZH8-32X.500SPP
H 4 Washer, internal star #8, SS ZH8LWSIS
I 2 Screw 6-32 x 3/8" flat hd phil, black oxide ZH6-32X.375BPF
J 2 Spacer, 1/4" hex x 1/2" L, 6-32 tapped SPA8423
K 1 Washer, fender, 1/4 x 1.5 x 14 ga, black oxide ZH255X1.50X62
L 1 Washer, split lock, 1/4" SS ZH1/4LWSSL