Pelco EM3000 Security Camera User Manual


 
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following warnings should be observed.
1. Installation and servicing should only be done by qualified service personnel and conform
to all local codes.
2. Installation shall be done in accordance with all local and national electrical and mechanical
codes utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times the
maximum specified load.
The product and/or manual may bear the following marks:
C262M-A (6/99)
EM3000
Enclosure Mount
3500 Pelco Way,
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel (1-559) 292-1981
FAX (1-559) 348-1120
www.pelco.com
®
This symbol indicates that danger-
ous voltage constituting a risk of
electric shock is present within
this unit.
This symbol indicates that there
are important operating and main-
tenance instructions in the litera-
ture accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
DESCRIPTION
The EM3000 light duty ceiling mount has been engineered for use with EH3010/EH3014 and
EH4010/EH4014 enclosures and light to medium weight weight cameras. It is designed for
ceiling mounting applications and is capable of supporting loads up to 20 pounds (9 kg).
The EM3000 has an adjustable head which allows mechanical positioning of the camera/
enclosure.
INSTALLATION
To install the EM3000 enclosure mount, perform the following steps:
1. Drill holes in the mounting surface using the mount as a template and attach the mount
securely with the recommended fasteners.
2. Attach the enclosure or camera securely with the two 1/4-20 hex head screws provided.
3. Loosen the allen head bolts on the swivel head and adjust for pan rotation (360°) and tilt
angle (75° up or down). Tighten bolts and lock into place.
SPECIFICATIONS
Pan Adjustment: Unlimited 360°
Tilt Adjustment: 75° (up or down)
Enclosure Mounting: Two 1/4-20 x .625 hex head machine screws
Suggested Mounting Method: Secure to solid surface with two (2) 1/4" diameter fasteners
Maximum Load: 20 lbs (9 kg)
Dimensions: See Figure 1
Construction: Steel
Finish: Polyester powder coat
NOTE:
The two hex head ma-
chine screws for mounting the
enclosure/camera are supplied.
Fasteners to secure the mount
to the desired mounting surface
are not supplied. Be sure to use
fasteners of a suitable size and
make certain the mounting sur-
face is able to support the com-
bined weight of the mount and
camera/enclosure.