Filter
Top Products
Pelco Manual C480M-F (10/04) 11
6.0 SPECIFICATIONS
MECHANICAL
Window: 1/2" (1.27 cm) thick; impact and abrasion resistant Lexan
Camera Mounting: Adjustable tilt table
Camera and Lens Size: Accepts camera and lens combinations (including BNC
connector) up to:
HS8000 4.0" H x 4.0" W x 8.0" L
(10.16 cm x 10.16 cm x 20.32 cm)
HS8013 4.0" H x 4.0" W x 11.0" L
(10.16 cm x 10.16 cm x 27.94 cm)
Enclosure Mounting: Four (4) .390" (0.99 cm) diameter holes on protected rear
surface
Security: Tamper-resistant screws N.O./N.C. switch contact on
cover
Tamper Switch: Plunger type door switch with “pull to cheat” feature. N.O./
N.C. contacts clearly marked on body of switch. DM elec-
trical rating: 10A, 125V. Plunger type with .20" (0.51 cm)
ELECTRICAL
Cable Entry: Six position terminal block. Two (2) cable knockouts holes
on flat mounting surface
Tamper Switch: 1/4" (.63 cm) quick connect. N.O./N.C. clearly marked
on switch body. 10A, maximum switching current 125V,
maximum switching voltage.
GENERAL
Construction: Seam welded 10 gauge .134" (0.34 cm) steel
Finish: Polyester powder coat
Dimensions: See Figures 7 and 8
Design and specifications are subject to change without notice.