Filter
Top Products
C2951M-B (10/09) 7
MINIMUM SYSTEM REQUIREMENTS
IX SERIES
Processor: Intel
®
Pentium
®
4 microprocessor, 1.6 GHz
Operating System: Microsoft
®
Windows
®
XP, Windows Vista
®
, or Mac
®
OS X 10.4 (or later)
Memory: 512 MB RAM
Network Interface Card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser: Internet Explorer
®
7.0 (or later) or Mozilla
®
Firefox
®
3.0 (or later)
NOTE: Internet Explorer is not supported by Mac OS X 10.4.
Media Player: QuickTime
®
7.55
NOTE: This product is not compatible with QuickTime version 7.6.4. If you have this version installed on
your system, uninstall it and then install QuickTime version 7.5.5 available on the resource disc shipped
with the product.
IXE SERIES
Processor: Intel Core
™
2 Duo microprocessor, 2.6 GHz
Operating System: Windows XP, Windows Vista, or Mac OS X 10.4 (or later)
Memory: 2 GB RAM
Network Interface Card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser: Internet Explorer
7.0 (or later) or Mozilla Firefox 3.0 (or later)
NOTE: Internet Explorer is not supported by Mac OS X 10.4.
Media Player: QuickTime 7.55
NOTE: This product is not compatible with QuickTime version 7.6.4. If you have this version installed on
your system, uninstall it and then install QuickTime version 7.5.5 available on the resource disc shipped
with the product.
LOGGING ON TO THE CAMERA
1. Open the Web browser.
2. Type the camera’s IP address in the browser address bar.
NOTE: If you do not know the camera's IP address, you can locate it using the Pelco Device Utility
software.
3. Click the Login button in the navigation bar; a dialog box appears.
4. Type your user ID and password; admin is the default for both.
NOTE: If this is the first time you are logging on to the camera as the administrator, the default User
ID and Password are admin (all lowercase). For security purposes, be sure to change the password
after you log on for the first time.
5. Click Log In.