22 Pelco Manual C397M (4/98)
Wiretron Receiver/Driver
Fuses: One 1 A, 3 AG type
Two 2/10 A, 3 AG type
Control Method: 15 pulse train (pulse width modulated)
Pulse Amplitude: 35 mA current loop
Cable
Requirements: Twisted pair, unshielded
Operating Distance: 22 AWG - 5 miles (8 km)
20 AWG - 10 miles (16 km)
ENCLOSURE
Construction: Aluminum
Finish: Gray polyester powder coat
Window: Glass, 0.25-inch (0.64 cm) thick
Window Viewing
Area: 3.8" H x 4.8" W (9.65 x 12.19 cm)
Camera Mounting: Removable camera than can be inverted to accommodate
various heights of cameras and lenses
Maximum
Camera/Lens Size:
EH5723 22" L x 7.5" W x 5.5" H (55.88 x 19.05 x 13.97 cm)
EH5723-1,-2,-3 15.5" L x 6.25" W x 5.5" H (39.37 x 15.88 x 13.97 cm)
EH5729 28" L x 7.5" W x 5.5" H (71.12 x 19.05 x 13.97 cm)
EH5729-1,-2,-3 21.5" L x 6.25 W x 5.5" H (54.61 x 15.88 x 13.97 cm)
Electrical
Connections: One each of the following:
3-connector terminal block for power input
6-pin lens connector
9-connector terminal block for lens wiring
10-connector terminal block for camera/lens wiring
3-pin socket for camera power input
2-pin socket for blower
2-pin socket for defroster
4-pin socket for heaters
4-pin socket for wiper
2-pin socket for wiper control
BNC for video
Accessory
Input Power: Heater (120 VAC models) 90 watts
Heater (230 VAC models) 70 watts
Defroster (all models) 30 watts
Blower (all models) 15 watts
Wiper (all models) 15 watts
(Design and product specifications subject to change without notice.)
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.