Filter
Top Products
26 Pelco Manual C342M-PSA (11/98)
8.0 SPECIFICATIONS
MECHANICAL
Pan Rotation: Movement in horizontal plane:
0-355°
0-360° (SL model only)
Pan Speed: 9°/sec +/-1° (no load condition)
Tilt Rotation: 90° down from horizontal
60° up from horizontal
Tilt Speed: 3°/sec +/-.5° (no load condition)
Torque Output: 23.8 ft. lb (32.3 N
.
m) at rated voltage and 75° (23.9°C)
Maximum Load: 52 lb (23.55 kg) at specified torque
Pan/Tilt
Drive System: Delrin™ worm gear. Ground and polished stainless steel worm
Pan/Tilt Bearings: Roller thrust bearings and bronze Oilite bushings
Lubricants
Bearings: NLGI #2; Lithium complex grease fortified with molybdenum
Chain: Teflon chain lubricant (for example, TriFlon™)
Braking: Friction
ELECTRICAL
Input Voltage: 24 VAC, 50/60 Hz
vA Required: Input Voltage 24 VAC
Pan 21.6 vA (.9 A)
Tilt 24 vA (1 A)
Total vA Required 45.6 vA (1.9 A)
Maximum Current: 2 amps per conductor (SL models only)
Connectors: Amp CPC type, mate supplied (37 pins)
Motor Type Single phase, instantaneous reversing, induction type. 120
VAC or 24 VAC, 50/60 Hz, impedance protected. 50% duty
cycle; 30-minute rating
Limit Switches: 5 amp, 250 VAC maximum, 10 million cycle rating, internal
adjustment
GENERAL
Construction
Pan/Tilt: Aluminum exterior; painted steel and aluminum interior parts
Worm Gear: Delrin™ premium performance acetal
Worm Drive: Ground and polished stainless steel
Dimensions: See Figure 18
Environment: Indoor/outdoor
-10° to 140 °F (-23° to 60°C)
Weight
Unit: 21.5 lb (9.68 kg) approximate
Shipping: 25 lb (11.32 kg)
(Design and product specifications subject to change without notice.)