Pelco PT780P/PP Security Camera User Manual


 
Pelco Manual C342M-D (8/05) 13
Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP
PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP
PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP
Coaxial Cable
27/4 Video Signal/Ground
30/4 Sync Signal/Ground (B) (B) (B) (B)
Unshielded Conductors
3 Left
7Right ••••
6Up
5 Down
1 Common (A) (A) (A) (A)
8 Safety Ground
10 Iris (B) (B) (B) (B)
11 Focus
12 Zoom
9 Camera Power (C) (C) (C) (C)
(AC High)
14 Camera Power (C) (C) (C) (C)
(AC Neutral)
13 Lens Common
15 Enclosure Power
(AC High)
16 Enclosure Power
(AC Neutral)
31 Heater Blanket (D) (D) (D) (D)
(AC High)
32 Heater Blanket (D) (D) (D) (D)
(AC Neutral)
25 Wiper
26 Washer (Future)
17 Spare
18 Spare
28 PP Ground
29 PP 5V
34 PP Focus
35 PP Zoom
33 PP Pan
36 PP Tilt
37 PP SL
Pins 2 and 19-24 are not used.
(A) Not used on VS models.
(B) Not available on some SL models. Check the 37-pin connector from the pan/tilt to see if pin is present.
(C) Use if camera power is different from enclosure power.
(D) Wire only if you ordered a heater blanket with your pan/tilt unit.
Table A-1. 37-Position Connector Pin Designations for Pan/Tilts with
EH4700L and EH5700L Enclosures