Pelco PT780P/PP Security Camera User Manual


 
14 Pelco Manual C342M-D (8/05)
Pin # Function PT780P PT780P/PP PT780-SL PT780-SL/PP
PT780-24P PT780-24P/PP PT780-24SL PT780-24SL/PP
PT780-VS PT780-VS/PP PT780-VSSL PT780-VSSL/PP
Coaxial Cable
27/4 Video Signal/Ground
Unshielded Conductors
3 Left
7Right ••••
6Up
5 Down
1 Common (A) (A) (A) (A)
8 Safety Ground
10 Iris (B) (B) (B) (B)
11 Focus
12 Zoom
9 Camera Power
(AC High)
14 Camera Power
(AC Neutral)
13 Lens Common
15 Enclosure Power
(AC High)
16 Enclosure Power
(AC Neutral)
31 Heater Blanket (C) (C) (C) (C)
(AC High)
32 Heater Blanket (C) (C) (C) (C)
(AC Neutral)
18 Pressure Switch (D) (D)
19 Pressure Switch (D) (D)
28 PP Ground
29 PP 5V
34 PP Focus
35 PP Zoom
33 PP Pan
36 PP Tilt
37 PP SL
Pins 2, 17, and 20-26 are not used.
(A) Not used on VS models.
(B) Not available on some SL models. Check the 37-pin connector from the pan/tilt to see if pin is present.
(C) Wire only if you ordered a heater blanket with your pan/tilt unit.
(D) Wire only if you ordered a pressure switch for your enclosure.
Table A-2. 37-Position Connector Pin Designations for Pan/Tilts with EH8106L Enclosures