Filter
Top Products
16
Getting Started
This camera uses an SD Memory Card and MultiMediaCard.
Captured images are recorded on the SD Memory Card/
MultiMediaCard if a card is inserted ( icon on the LCD monitor),
or in the Built-in memory if no card is inserted ( icon on the LCD
monitor). Make sure that the camera is turned off before inserting
or removing the SD Memory Card/MultiMediaCard.
z
Open the battery/card cover.
x
Insert SD Memory Card/MultiMediaCard so the label
(the side with the
̆
symbol) is facing toward the LCD
monitor and push the card in until it clicks.
c
Close the battery/card cover.
To remove the card, eject the card by pressing it in the direc-
tion indicated by the arrow and pull it out.
b Approximate Number of Recordable Images and
Recorded pixels/Quality levels
• The above table indicates the number of images when using a 16MB
SD Memory Card.
• The above table is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions,
capture mode, SD Memory Card, etc.
Installing the SD Memory Card/MultiMediaCard
Battery/Card cover SD Memory Card/
MultiMediaCard
To remove the card,
push and pull out
Quality levels
Recorded pixels
Best
(ȢȢȢ)
Better
(ȢȢ)
Movie images
(320 × 240)
1600 × 1200
1024 × 768
11
20
30 sec. × 3
sets
640 × 480
26
47
57
89
2048 × 1536
7
13
Good
(Ȣ)
28
62
119
19