Filter
Top Products
62
4
Taking Pictures
In R (Program) mode, the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R
(Program).
3 Press the 4 button.
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.87 - p.105) for details of how to set the
functions.
5 Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
6 Press the shutter release button fully.
The picture is taken.
Setting The Functions (Program Mode)
Taking Still Pictures 1p.40
Shutter release
button
Four-way controller
4 button
38
38
38
14:25
14:25
14:25
02/02/2008
02/02/2008
02/02/2008