Filter
Top Products
86
4
Taking Pictures
The procedure for setting the focus manually (\) is described below.
1 Press the four-way controller (5)
in A mode.
2
Use the four-way controller (
5
) to
select
\
and press the
4
button.
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3
Press the four-way controller (
23
).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2 : for distant focus
3 : for closer focus
4
Press the
4
button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
•In 9 mode, you can only select =, 3 and q.
• If you select something other than,3 or s for the focus mode when
shooting with C the sound of the camera focusing may be audible
in the recorded sound, depending on the shooting environment.
• When shooting with = selected, if the subject is closer than 40 cm,
the camera automatically focuses from 8 cm (when the focus limit is
off).
• When shooting with q selected, if the subject is further than 50 cm
away, the camera automatically focuses to infinity (when the focus
limit is off).
Saving the Focus Mode 1p.105
Manual Focus
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
Focus Mode
Focus Mode
Focus Mode
Manual Focus
Manual Focus
Manual Focus
OK
OK
OK
OK
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
5m
5m
2
2
5m
1
1
MENU
OK
OK
OK
OK
\ indicator