Filter
Top Products
14
SERVICE
The photographer should not attempt to make repairs.
Consult a dealer for an authorized Photogenic Professional Lighting service
agent. This will provide you safety, insure proper operational functions and
provide continuation of your warranty.
Before removing the old tubes or installing new tubes, always
unplug your StudioMax and discharge the stored energy by
switching the POWER switch to OFF. Wait approximately two hours
for the main capacitors to deplete any residual stored wattage. If
the StudioMax does not flash when turned OFF (flash tube may be
defective), the unit must remain OFF for four hours to discharge the
main capacitors. Never place your fingers or any metal objects into
the flash or modeling sockets. Contact with high voltage may result.
Limited StudioMax III Warranty
Photogenic warranties the “standard line” products are free from
defects in material and workmanship of the AK series of
StudioMaxIII Lights for a period of ONE year. At our choice, we will
repair or replace any AKC series light that is deemed to be
defective. This warranty does not cover damages caused by
shipping, product abuse or use other than the intended
photographic applications.
Any product modifications will render this warranty void. Use of
other manufacture’s accessories, which restrict normal or intended
operation (especially venting airflow), may cause damage and will
void this warranty.