Filter
Top Products
22
4. Press the shutter button to display the Erase All screen.
5. Press the Next/Self-timer button to erase all the images in the camera
memory.
Press the Previous/Flash button to close the Erase All screen without erasing
any images.
Warning: Once you erase an image, it cannot be retrieved - it is gone forever!
Before you erase any images, transfer the images to your computer. If you have a
memory card, copy the images to the card and remove the card from the camera.
Displaying Images on a TV (NTSC only)
View the images stored in your camera on any TV equipped with a video input terminal.
1. Turn off the TV and turn off the camera.
2. Plug one end of the video cable into the video input connector on the TV.
3. Open the side compartment on your camera and the plug the other end of the video
cable into the VIDEO OUT connector.
4. Turn on the TV and set the channel used for video input.
For more information about using your TV for video input, refer to the manufacturer's
manual for your TV.
5. Turn on the camera.
The camera is in Record mode.
6. Press the Play/Record Mode button to enter Play mode. Use the Next/Self-
timer and Previous/Flash buttons to review the images one at a time.
Press the Multiple Display/EV button to view the images as thumbnails.